The home installs coating to be us to make colorful life good helper, like what color is brushed what color, and return convenient and material. But often brush decorates coating in just a few years began to slowly faded color, luster and not once upon a time, is to use good paint coating is also keep more for more than ten years, the whole house began to become dull. Dong yi bao imitates the stone lacquer brand to remind, if want to make the home to install coating more lasting bright, need to pay attention to construction and later maintenance.

    In water-based coating, water as solvent and solvent coating compared with organic solvent, have distinct properties: it is rich in water resources, in terms of coating product, to say the inexhaustible; Water safety, no harm to human body, no pollution to the environment. The volatile matter of water is water vapor, which will neither increase VOC nor produce harmful air pollutants, nor will it produce atmospheric reaction under the action of light and oxygen, causing secondary air pollution. Water is non-combustible, unlike solvent - based coatings, which are flammable products, so whether the transportation, storage and construction of coatings have a greater security risk.

    Coating on the surface to dry and better performance of the time, the standard temperature of 25 ℃ needs 7 days, in accordance with the environmental temperature of winter coating construction generally low, the paint film is dry and achieve a better performance is relatively prolonged, during this period to minimize contamination on the surface of paint film, knock against, avoid caused by pollution, knock against, affect the overall effect. When entering the winter construction, the corresponding protective measures should be taken according to the construction conditions on the site to avoid the coating film from freezing. To ensure the project coating quality and construction progress smoothly.

    Is the quality of the topcoat good enough to get rid of the primer? Of course not. Primer has a closed walls at the grass-roots level, and improve the paint adhesion, fullness, such as multiple function, if there is no coating primer, then paint above may lead to paint too much too fast, besmear brushs metope appear even change color, shortly after the film falls off, and other problems. When besmear brushs metope, must not be in order to save money and eliminate go up this one step of primer, want to know, went up the metope of primer wants more lasting more money.

    Water is a polar solvent, as a main composition of emulsion paint in the latex paint resin and fillers, must with the aid of emulsifying agent and dispersant, emulsification and dispersion in water respectively, at the same time may join Texnol, propylene glycol phenyl ether, diethylene glycol butyl ether, three glycol butyl ether as film-forming agent, because of heavy water surface tension and volatile slow, often also need to add a small amount of organic solvent to reduce the surface tension, in order to improve the speed of volatile. For the above purpose, at the same time of adding organic solvent, the corresponding increase the product the toxicity and pollution to the environment of human body, reduce the safety of the product, so, in water-based coating should try to reduce the dosage of the organic solvent. It is also an important technical index to measure the waterborne coatings of the brand of imitation stone paint.