Into winter coating construction, on-site to paint should be located indoors and in a unified classification shelved, oil paint and coating to partition pieces, not in the same room, and to ensure indoor temperature above 0 ℃, the temperature is lower than 0 ℃ when heating or use electric heater should be used in indoor temperature, open flame is strictly prohibited increase indoor temperature. The unused coating should be placed indoors during construction, and the frozen product will not be used again. No matter be in the family decorate, still be in the decoration process of public place, a lot of places need waterproof coating, but how should waterproof coating preserve.

I. how to store the waterproof coating joined by water paint after purchase:

    1. The waterproof coating should be used up as soon as possible after it is opened. It is easy for the coating to react with the air and affects the performance of the coating. If you want to keep it, you must seal it. This is the basic preservation condition.

    2. Waterproof coatings, like other coatings, should be stored in a cool, ventilated and dry place to prevent rain and sunlight from direct exposure to the sun, and should be free from fire and away from heat sources. Coating preservation temperature can be controlled within 5 to 25 ℃, to prevent the high temperature summer, winter antifreeze.

II. Matters needing attention in the construction process:

    1, it is strictly prohibited in the ambient temperature is lower than the temperature of 5 ℃ or more than 80% under the condition of construction;

    2, recommend good coating temperature is between 10 ℃ to 35 ℃, relative humidity in 30 ℃ to 70 ℃;

    3. All waterborne coatings and tools and timber shall not be stained with grease, oil paint or tinned water

    4. Do not paint in direct sunlight, and proper ventilation will make the drying time faster.

    5. If the repainting time is too long and the coating film is dry, it must be polished before painting;

    6. Immediately after completion of construction, clean the utensils with clean water;

    7. The putty is not suitable for thick scraping, and the filling shall prevail. The putty cannot be used to improve fullness or cover strength.

    8. The diluted paint shall be stored separately, and shall not be mixed with the original paint.

    When the waterproof coating is used up, the remaining clean paint and blending paint can be put in a bottle if it is not used in a short period of time. Use a glucose bottle, or a bottle. When the lid is closed, place the bottle upside down (ie, with the mouth facing down) and place it in the dark a day or two later. When stored for such a long time, the oil coating will not appear hard skin and solidify. After coating the furniture, if a day or two, paint again, the brush can be cleaned without gasoline. Find an empty can bottle and place the brush directly into the bottle. Fill it with clean water (diesel or kerosene is preferred) so that the water completely covers the brush's head. When you use it again, shake the water off the brush.

    Caution, if the coating preservation method is not appropriate, it will directly affect the use of the remaining coating. Coating used in kaifeng within 1 month after the better, because the coating after the water may be dirty water pollution, and roller dip in mold construction can cause coating on the metope of microbial rapid deterioration.