Nano - tech waterproof coating: high - elastic polymer emulsion and inorganic nanomaterials composite high - performance new products, domestic first, international advanced. After drying and curing, the elastic elongation rate of coating reached more than 300%, which basically met the normal condition of thermal expansion and cold shrinkage. Once the coating is damaged by accident, there are holes and cracks. When it meets water, it can repair itself, stop water with water and keep waterproof for a long time. This product is composed of a and b components, group a is liquid, and group b is powder. When used, mix well and stir well.

    Nano-technology waterproof coating features:

    1. The construction is convenient, and the construction can be carried out on the wet base surface with strong adhesion, and the vertical surface construction is not flowing;

    2. Good flexibility, able to resist slight vibration and certain displacement of buildings;

    3. Good water resistance, easy to bond with wet substrate;

    4. Water-based materials, non-toxic and harmless, pollution-free and environment-friendly products.

    Generally speaking, nano-coatings must meet two conditions: first, the particle size of at least one phase of the coating is within the range of 1-100nm. Secondly, the nanometer phase makes the coating performance to have the obvious enhancement or has the new function.

    With the development of nanotechnology and the penetration of all areas, using nanometer materials improve waterproof coating properties (elastic and durability) is applied to the study on the use of waterproof coating, already appeared the inorganic nano waterproof coating.

    The construction method of nano-technology waterproof coating under the brand of imitation stone paint:

    1. Preparation: make sure the concrete base surface is clean. Those with dust and dirt should be cleaned, those with floating slurry should be cleaned, those with clear water should be erased. To ensure the construction temperature above 0 ℃, spraying operation should not have other type of work cross construction work.

    2. Operation method: the cloaked water repellent of KNF can be sprayed. When large area spray is applied, the cloaked waterproof agent of KNF is shaken and then poured into the knapsack or electric sprayer. After adjusting the nozzle to the appropriate speed, careful and uniform spraying is carried out. Water shall not be touched or trampled within 3 hours after completion of construction, and acceptance and other procedures shall be allowed after 24 hours.

    3. Detail treatment: detailed structural construction methods are described in the introduction to the us comax yongning condensate DPS product.